Comprehensive current injection efficiency, radiation luminescence quantum efficiency, external light extraction efficiency of the chip, etc., finally only 30-40% of the input electrical energy is converted into light energy, and the remaining 60-70% of the energy is mainly caused by non-radiative recombination lattice vibration. Form converts heat.
The increase in the temperature of the chip enhances the non-radiative recombination and further weakens the luminous efficiency. Because people think that high-power LEDs have no heat, in fact, there are. A lot of heat, so that problems occur during use. In addition, many people who use high-power LEDs for the first time do not know how to solve the heat problem effectively, which makes product reliability a major problem. So, is there any heat generated by the LED? How much heat can it generate? How much heat does the LED generate?
Under the forward voltage, the electrons obtain energy from the power source. Under the driving of the electric field, the electric field of the PN junction is overcome, and the N region transitions to the P region. These electrons recombine with the holes in the P region. Since the free electrons drifting to the P region have higher energy than the electrons of the P region, the electrons return to the low energy state when recombined, and the excess energy is released in the form of photons. The wavelength at which the photons are emitted is related to the energy difference Eg. It can be seen that the illuminating region is mainly near the PN junction, and the luminescence is the result of the release of energy by the recombination of electrons and holes. A semiconductor diode, in which electrons encounter resistance throughout the journey from the semiconductor region to the semiconductor region. Simply from the principle, the physical structure of the semiconductor diode is simply from the principle, the physical structure of the semiconductor diode is equal to the electrons emitted from the negative electrode and the number of electrons returning to the positive electrode. In a common diode, in the recombination of electron-hole pairs, the photon spectrum released is not in the visible range due to the difference in energy level Eg.
When electrons are inside the diode, power is consumed due to the presence of resistance. The power consumed is in accordance with the basic laws of electronics:
P=I2R=I2(RN++RP)+IVTH
Where: RN is the N-region body resistance VTH is the turn-on voltage of the PN junction. RP is the heat generated by the power consumption of the P-region resistor:
Q=Pt
Where: t is the time when the diode is energized.
In essence, the LED is still a semiconductor diode. Therefore, when the LED is working in the forward direction, its working process conforms to the above description. The electric power it consumes is:
P LED = U LED × I LED
Where: U LED is the forward voltage across the LED source:
I LED is the current flowing through the LED. These consumed electrical power is converted into heat release:
Q= P LED ×t
Where: t is the power-on time
In fact, the energy released by the electrons in the P region and the holes are not directly supplied by the external power source, but because the electrons are in the N region, when there is no external electric field, its energy level is better than that of the P region. The valence electron energy level is higher than Eg. When it reaches the P region, it recombines with the holes to become the valence electrons of the P region, and it releases so much energy. The size of the Eg is determined by the material itself and is independent of the external electric field. The effect of the external power supply on the electrons is only to push it to do directional movement and overcome the role of the PN junction.
The heat production of LEDs has nothing to do with light efficiency; there is no electricity generated by a few percent of the electricity, and the remaining electrical power of a few percent produces a thermal relationship. Through the understanding of high-power LED heat generation, thermal resistance, junction temperature concept and theoretical formula derivation and thermal resistance measurement, we can study the actual package design, evaluation and product application of high-power LED. It should be noted that thermal management is a key issue in the current stage of low luminous efficiency of LED products . It is the bottom line to fundamentally improve the luminous efficiency to reduce the generation of thermal energy, which requires chip manufacturing, LED packaging and application product development. Advances in technology at all stages. (Source: Technical Engineering)
What features you consider more when you choose an university laptop for project? Performance, portability, screen quality, rich slots with rj45, large battery, or others? There are many options on laptop for university students according application scenarios. If prefer 14inch 11th with rj45, you can take this recommended laptop for university. If like bigger screen, can take 15.6 inch 10th or 11th laptop for uni; if performance focused, jus choose 16.1 inch gtx 1650 4gb graphic laptop,etc. Of course, 15.6 inch good laptops for university students with 4th or 6th is also wonderful choice if only need for course works or entertainments.
There are many options if you do university laptop deals, just share parameters levels and price levels prefer, then will send matched details with price for you.
Other Education Laptop also available, from elementary 14 inch or 10.1 inch celeron laptop to 4gb gtx graphic laptop. You can just call us and share basic configuration interest, then right details provided immediately.
University Laptop,Laptop For University Students,University Laptop Deals,Recommended Laptop For University,Laptop For Uni
Henan Shuyi Electronics Co., Ltd. , https://www.shuyipcs.com