Ever since she met Zhang Aunt, many things have been poisoned by her and then lost. From the oldest U.S. Philips razors, dishwashers, kitchen wares, Dyson V6... to the Dafa MDR1000X just received today. Then the wallet is empty. However, because of a lazy cancer attack, it is difficult for the second to grab the first sun, so the interest in writing is not great, even though the aunt said that you want the public to write more originality, but people are so good.
At the same time as a veteran rice flour, after last year's launch of the millet drone, has always wanted to buy a play, when the 1080P version, no interest, because it is said that 4K only expensive 500. So wait until the 4k machine comes out, ready to get a sip, by the way, in the morning sun Aunt Zhang.

However, actually Dajiang also sold a wizard 3SE, from the parameters, it is to fight this 4K UAV drone.

The same 4K on the parameters, the same 4km chart transmission, the battery life parameters only one minute. Then the Wizard 3SE adds some money and there are two times a year new insurance.
Basically, Rebs had the cup this time, this can not be ridiculed by the millet drone, it is simply a month to see this life and death.
At the time, it was also awkward, whether it was scheduled to ship the Wizard 3SE from March 31, or buy this millet 4K.
From the perspective of technical continuity and machine stability, DJI is crushed by paper analysis. After all, one is the first in the world, and one is a millet miscellaneous store. It may be that Rebus is the cheaper part to sell, and the machine could have used cheaper selling points. This is yellow.
However, because of the deep love for Zhang Aunt, I decided to grab this opportunity in the first sun. Really can not buy a wizard later 3SE contrast chant.
So, on the night of March 3, a single order was placed in Jingdong. Then the courier of Jingdong called me at noon today, March 4. People who saw many big cities on Weibo said that they received the machines during the day on March 3. Really scared sweat. The starting ah.
Because the millet drone has a novice mode, it is said to fly for 300 minutes, so I decided to dry it out of the box today.
And new batteries, new handles have to be charged. There is no way to open the box and then go to fly.
Appearance Gallery Inside is such a carton.
Power Transformers
Power plug
battery
Battery properties
PTZ camera
A front view of the PTZ camera inserted into the bottom.
A total of 8 of the two were sent, and the paddle caps were of two colors.
Install the protection frame.
You can see the electric coil when installing the paddle, so you can't fly in too humid weather. I mainly want to wear cloud clouds, I do not know if it will easily lead to failure, but read the instructions of the homeland, but also hope to fly in the fine weather.
The paddle must be pressed against the click shaft, then turn the spinner cap clockwise until the lock mark aligns with the paddle positioning arrow.
Battery bay
Thermal hole above the machine's flight arm. Because of the existence of this thing, I feel that the danger of flying in the fog seems to be very big.
Photographed with em5's em5, the photo texture is not a mutation. Yellow paddle cap feels good.
PTZ cameras have a wifi tag and a camera tag, respectively. Unknown use. I do not know whether it is a function on a drone or a separate PTZ camera display function.
In addition to the battery, other components are installed. Wait until the battery is full before testing.
On the installation, the landing gear of the millet drone this time is already installed on the body after the box is unpacked. It can be folded and folded. It is also more convenient to hear the sound. So portability I think is very good.
I feel that the buttons attached to the PTZ feel better. Not hard to find. But be careful not to let go without snapping back.
Paddle this time compared to the 1080p version has been changed into one. Therefore, there is no problem with the original fall off. Still relatively simple. 4 paddles, two shades. Only two shades can be crossed, and they cannot be parallel. Be careful.
After charging in the afternoon for a little more, the original battery already had two cells. It is said that long-term storage is also suitable for storage when two grids are used, and it does not cause battery failure such as bulging. When the charge is full for about two hours, the power light will automatically go out. The same is true of the operating handle.
However, it actually rained in the afternoon. Then the weather forecast will be light rain tomorrow and it will not clear until next Tuesday. I feel that beginners still don't want to play the first flight indoors. So wait for the good weather.
Before the test flight, a simple analysis, millet this product has a selling point. Well, the PTZ camera seems to be better than DJI. After all, the anti-shake structure is not the same, although it is 4k. The battery of this accessory is more powerful, cheaper and only sells 499. To play drones, buy three or four batteries, which are a lot cheaper than Dajiang’s. Double IMU and double compass, the word seems a bit professional, I still do not understand. At present, you can buy it at Jingdong. It's not futures that have been dragged for so long. However, the Genie 3SE is still in production. Currently the 3E is still sold out.
I like to disturb the market's carp. After all, there is no millet drone 4K, Dajiang's Genie 3 will not appear SE this model is not.
Wrote some sings. Usually everyone else says that the tans I write are poisoned. Only others are poisoned. I let people read it one by one and detoxify it. I think that there are already so many people poisoning articles, and there should be one that is responsible for detoxification. So please wait for the next flight test and the next chapter to unlock the feel of the novice mode. If lazy cancer doesn't happen, then...

The handheld addresser is used to program the address of the monitoring module offline. When in use, connect the two output wires of the handheld encoder to the communication bus terminal (terminal label 1, 2) of the monitoring module, turn on the black power switch on the right side upwards, and press "ten Add", [Subtract ten", [Add one place" and [Subtract one place" to program the address.
Hd Encoders,Twitch Encoder,Resolver Encoder,Incremental Rotary Encoders
Changchun Guangxing Sensing Technology Co.LTD , https://www.gx-encoder.com