Automobile headlights LED matrix (Matrix LED Headlight), that is, the vehicle headlight assembly, in a matrix (the Matrix) is arranged led light, and gain control.
Each of the LED light sources that make up the matrix can be illuminated, turned off, or dimmed independently. The LED light sources in the matrix fit together to provide variable, precise illumination of the front area. The Matrix LED Headlight consisting of 25 LED light sources can realize the combination of hundreds of millions of lighting forms. It only needs to control the opening and closing of each LED light source. It does not depend on the traditional mechanical mechanism. The matrix led headlights are inherently light. Quantify the advantages.
The camera captures the environmental conditions in front of the vehicle and transmits it to the Matrix LED Headlight control unit. After its algorithm operation, it determines the status of each LED light source (light and dark).
When following the car and the car, you can quickly judge the position and running state of the vehicle in front, and close the corresponding LED light source in the matrix accordingly, so that the illumination of the area in front of the car is reduced, so as to avoid affecting the front car/opposite driver, resulting in Danger. At the same time, the current car leaves this area, Matrix LED Headlight will quickly respond to the LED light source in the corresponding matrix, increase the illumination of the area, increase the illumination distance, and enhance the driver's vision.
Working conditions and Matrix led control :
Turn left:
When turning left, increase the brightness of the LED light source on the outside of the left headlight to improve the driver's view of the inside of the curve and improve safety. At the same time, the high-beam LED light source on the inner side of the right headlight is turned off to reduce the irradiation of unnecessary areas and save energy.
Turn right:
When turning right, increase the brightness of the LED light source on the outside of the right headlight to improve the driver's view on the inside of the curve and improve safety. At the same time, the high-beam LED light source on the inner side of the left headlight is turned off to reduce the irradiation of unnecessary areas and save energy.
2.2mm Pitch
2.2mm Pitch
ATKCONN ELECTRONICS CO., LTD , https://www.atkconn.com