DS2762 High Precision, Li+ Battery Monitor Description and Pin Configuration Diagram

Factory direct 5050 yellow light LED 5050 yellow light 5050 yellow high quality high brightness
Test - lowercase jpg
Kaixin micro test
Probe high frequency needle 10445 with line high frequency needle with 1 high frequency core can pass 3A

Overview:

The DS2762 high-precision Li+ battery monitor is a device that combines data acquisition, information storage and security protection for cost-sensitive battery pack applications. This low-power device integrates accurate temperature, voltage, and current measurements, non-volatile (NV) data storage, and Li+ battery protection circuitry in a small TSSOP package or flip-chip package. The DS2762 is the best solution for applications such as residual capacity estimation, safety monitoring and battery characterization data storage.

Key features:

  • Li+ battery safety circuit
    • Overvoltage protection
    • Overcurrent/short circuit protection
    • Undervoltage protection
  • When the accumulated current or temperature exceeds the threshold set by the user, a warning signal is sent to the host.
  • 0V battery recovery charging
  • There are two versions:
    • Built-in 25mΩ current-sense resistor
    • External user selectable current-sense resistor
  • Current measurement
    • 12-bit bidirectional measurement
    • Internal current-sense resistor: 0.625mA LSB and ±1.9A dynamic range
    • External current-sense resistor: 15.625μV LSB and ±64mV dynamic range
  • Current accumulation:
    • Internal current-sense resistor: 0.25mAhr LSB
    • External current-sense resistor: 6.25μVhr LSB
  • Voltage measurement resolution 4.88mV
  • Temperature measurement with integrated sensor, resolution 0.125 ° C
  • Support system power management and control functions
  • 32-byte lockable EEPROM
  • 16-byte general purpose SRAM
  • Dallas 1-Wire® interface with unique 64-bit device address
  • Low power consumption:
    • Working current: typical 60μA, maximum 90μA
    • Sleep current: typical 1μA, maximum 2μA

Application / Use:

  • Cellular phone/smart phone
  • Digital camera
  • PDA

Gan Charger

Gan charger

Pogo Technology International Ltd , https://www.wisesir.net

This entry was posted in on