Uninformed, I accidentally found that the data line has such a play, so a certain single East. The link is as follows:

The page receives 7-6 coupons, superimposes the free shipping coupons, and costs 13.9 yuan.
I have seen a lot of Android Apple's common data lines before, and they all look like this:
It looks like it's a screw.
But to think of this, grow into this:
The main purpose is to put it into a backpack and use it with a mobile power supply. In the winter just past, Northeastern Silver Co. took out the iphone and was turned off by the frozen seconds. The mobile power is indispensable, but the mobile power supply is the Micro USB common to Android phones. Apple's mobile phone means either two lines or the plug-in-two-line line above. Well, now there is one more choice.
Here is the out of the box:
The packaging is simple and there is nothing to say.
Short-term, personal habits, when used is the phone and mobile power stacked together, so short-term more convenient.
This plug, so thin, returned to the slot
Inserting the apple is losing the double-sided function, only one side is available, and looking at the picture, it is the charging state when the plug letter is down, and it can be charged and can transmit data.
When inserting the mobile power, the plug is not very tight, there is a little margin at the plug and can be slightly shaken, but within an acceptable range.
Finally sum up:
The advantage is that the design is special. The disadvantage is that the plug can not be used on both sides, and expensive, the same function of the line a treasure 5 yuan shipping quality is not bad.
Originally, there were ten things that didn't need to be single. It really felt that the design was a bit special. It was sent out to everyone to see if it was the landlord who was really ignorant. Everyone should watch it.
At the end of the month, use endless pieces of silver and take a wave!
The copper base board is the most expensive one among the metal substrates, and the heat conduction effect is many times better than that of the aluminum substrate and the iron substrate. It is suitable for high-frequency circuits and regions with high and low temperature variations and the heat dissipation and architectural decoration industries of precision communication equipment.
Generally, the finishing include ENIG, immersion silver, LF HASL, OSP, etc. The copper substrate circuit layer is required to have a large current carrying capacity, so a thick copper foil should be used, and the thickness is generally 35 μm to 280 μm; the thermal conductive insulating layer is the core technology of the copper substrate, and the core thermal conductive component is aluminum oxide and silicon powder. It consists of a polymer filled with epoxy resin, low thermal resistance (0.15), excellent viscoelasticity, resistance to heat aging, and ability to withstand mechanical and thermal stresses.
Copper Base Pcb,Copper Circuit Board,Heavy Copper Pcb,Copper Clad Pcb
Chuangying Electronics Co.,Ltd , https://www.cwpcbs.com