Recently, China Electronics Import and Export Corporation announced on the website of the "Efficient Lighting Product Promotion Project" winning bid, Foshan Lighting (000541), Zhejiang Sunshine (600261), Snow Wright (002076) and other companies have won the bid.
The tenderers of the “Efficient Lighting Product Promotion Project†are the Department of Economic Construction of the Ministry of Finance and the Department of Resource Conservation and Environmental Protection of the National Development and Reform Commission. The project has a total of 5 packs, the first package "self-ballasted fluorescent lamps for general lighting (5-8W)", the second package "self-ballasted fluorescent lamps for general lighting (9-14W)", the third package "for ordinary lighting Ballast fluorescent lamps (18-24W)", 11 companies have won the bid; the fourth package "three-color double-ended straight tube fluorescent lamp (T8)", the fifth package "three-color double-ended straight tube fluorescent lamp (T5 and bracket)" There are 5 companies winning the bid.
Among them, Zhejiang Sunshine, Foshan Lighting, and Snow Wright won the first and third packs. The first package of Zhejiang Sunshine and Foshan Lighting was 5W and 7W; the size of Snowlight's finalists was 5W and 8W. The third package of Zhejiang Sunshine's finalist specifications is 18W, 20W; Foshan Lighting's finalist specifications are 18W, 24W; Snowlet's finalist specification is 24W. Zhejiang Sunshine and Foshan Lighting also won the second and fifth packs. The second pack of Zhejiang Sunshine's finalists was 9W, 11W and 14W; Foshan Lighting's finalists were 9W, 11W and 13W. The fifth package of Zhejiang Sunshine's finalist specifications is 14W, 28W; Foshan Lighting's finalist specifications are 14W, 28W. The fourth package of T8 products, only one of the listed companies Foshan Lighting won the bid, the winning standard is 18W, 36W.
Shelter said today that the company has not received the bid-winning notice or any other information related to the results of the bidding, and therefore cannot determine the impact of the above-mentioned winning bids on the company.
According to the "Notice of the State Council on Printing and Distributing the Comprehensive Work Plan for Energy Saving and Emission Reduction", during the "11th Five-Year Plan" period, the state supported high-efficiency lighting products to replace incandescent lamps and other inefficient lighting products in use, and accelerated the promotion of high-efficiency lighting products. use. The subsidy funds are indirectly subsidized, and the financial subsidies are given to the winning bidders. The winning bidders then sell the products to the end users at the price of the bidding agreement minus the financial subsidy funds. The ultimate beneficiaries are large users and urban and rural residents.
The tender is to determine the supply price of the enterprise, product and agreement for the efficient lighting products that are financially subsidized (the price of the installation to the household). The winning bidders shall cooperate with the local energy conservation authorities and the financial departments in accordance with the promotion tasks and regional task assignments issued by the state.
1
High Precision Multilayer PCB|multilayer printed circuit board
Product name:
Industrial control board
Characteristic:
1, the board design
integration is very high;
2, the need to use composite
surface treatment method, gold finger plating hard gold 30 uinch;
3, gold finger position plate
thickness tolerance 1.6mm+/-0.10mm, it is recommended that customers in the
design of the gold finger corresponding to the inner line of the copper block,
in order to facilitate the plate thickness tolerance control.
Specifications:
Layer count: 6
Board thickness: 1.60mm
Base materials: FR4 S1141
Finished size: 172*148mm
Surface finish: Gold Plated +
finger
Line width/line space: 5/5mil
Minimum hole: 0.25mm
Solder resist color: blue
Cu thickness: inner layer 1 OZ
outer layer 1 OZ
Product name:
Thick Copper Board
Characteristic:
Prominent features: the outer
layer of copper thickness of 6 OZ, the inner product of copper thickness 6 OZ,
commonly used in large power equipment.
Processing difficulties:
1, inside and outside the need
to increase the thickness of copper thickness of 2 OZ or more by electroplating
method;
2, before pressing the need to
fill in the inner layer of resin;
3, the inner and outer layer
circuit is difficult to etch;
4, solder resist the need for
multiple printing.
Specifications:
Layer count: 4
Board thickness: 3.0mm
Base materials: FR4 S1000-2
Finished size: 175*104mm
Surface finish:
Line width/line space:
12/12mil
Minimum hole: 0.5mm
Solder resist color: Sensitive
green
Cu thickness: inner layer 6 OZ outer layer 6 OZ
Product name:
Data acquisition board
Characteristic:
1, the integration of the
board design is very high, thick diameter ratio of more than 10:1, heavy copper
plating is difficult;
2, the use of TG 170 plate
production.
Specifications:
1, the integration of the
board design is very high, thick diameter ratio of more than 10:1, heavy copper
plating is difficult;
2, the use of TG 170 plate
production.
Layer count: 8
Board thickness: 4.0mm
Base materials: FR4 S1000-2
Finished size: 400*400mm
Surface finish: mmersion
Line width/line space: 5/5mil
Minimum hole: 0.35mm
Solder resist color: Sensitive
green
Cu thickness: inner layer 1 OZ
outer layer 1 OZ
About Us:
BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.
Why Us?
UL (E492586), ISO9001, ISO14001, TS16949, RoHS certified.
Turnover USD 10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 16 layers.
Special Material:ROGERS, Arlon, Taconic.etc.
Client:Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.
Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):
Factory Tour:
Exhibition:
We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.
Delivery:
BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
We don`t just sell PCBs .We sell sleep.
High Precision Multilayer PCB
High Precision Multilayer PCB, Multilayer Printed Circuit Board, Half Hole High-Precision Multilayer Board, High Precision Multilayer Board
Shenzhen Bente Circuit Limited , http://www.bentegroup.com