1. The indoor screen series indoor screen area is generally less than ten square meters, the point density is high, and it is used in non-direct sunlight or lighting environment. The viewing distance is several meters away, and the screen body does not have sealing and waterproofing ability. According to the control method and display color, it can be divided into the following types:
â— Indoor full color video screen
★ Adopt independent point-by-point correction technology to ensure uniformity between points.
★ The light-emitting point of the display panel adopts a column-shaped flat-headed light-emitting diode. After testing, the vertical and horizontal full-view angles can reach 150 degrees.
★ The reflector that forms the lamp panel is made by opening the mold and seamlessly matches the light-emitting point. The finished product can be made with minimal surface height error.
★ Using LEDs, the brightness of the light is 6-8 times the brightness of the light-emitting chip.
★ The heat of the LED is mainly lost from the metal pin, which determines the display panel has good heat dissipation performance.
★ Bad LEDs can be replaced one by one, without affecting the use of other LEDs and reducing maintenance costs.
★ Using the latest technology level video control system, the display color is bright and clear.
★ Main technical parameters
Base color RGB (full color) Pixel diameter [mm] 5.00 8.00
Pixel pitch [mm] 7.62 10.00
Pixel composition 1R1G1B 2R1G1B virtual pixel unit panel number [dot] 32×32 32×16
Unit panel size [mm] 245×245 320×160
Unit panel weight [g] 1100 850
Physical pixel density [point / m2] 17200 10000
Virtual pixel density [point / m2] 16384 40000
Peak power consumption [W/m2] 850 750
Average power consumption [W/m2] 350 320
Weight [Kg/m2] <36 <36
Horizontal viewing angle 150°
Vertical viewing angle 150°
Highest brightness [cd/m2] 1700 800
â— Indoor double color video screen
★ The display module adopts Dachang products, and the brightness and illumination consistency of the whole screen is good.
★ The system is stable and mature, the installation is simple without debugging, and the failure rate is extremely low.
★ Using the latest technology level video control system, the display color is bright and clear.
★ Main technical parameters
Primary color RG (red, green, double primary color)
Pixel diameter [mm] 3.75 5.00
Pixel pitch [mm] 4.75 7.62
Pixel composition 1R1G 1R1G
Unit panel points 64 × 32 (or 80 × 32) 80 × 32
Unit panel size [mm]
306 × 153 (or 382 × 153)
612×245
Unit panel weight [g] 800 1500
Pixel density [point / m2]
43000 17200
Peak power consumption [W/m2] 700 350
Average power consumption [W/m2] 300 200
Viewing angle 150°
Communication distance (m) 100 (no relay)
â— Indoor monochrome screen
★ The display module adopts Dachang products, and the brightness and illumination consistency of the whole screen is good.
★ The system is stable and mature, the installation is simple without debugging, and the failure rate is extremely low.
★ Depending on the usage requirements, synchronous or asynchronous methods can be used.
★ Main technical parameters
Base color monochrome pixel diameter [mm] 3.0 3.75 5.00
Pixel pitch [mm] 4.0 4.75 7.62
Pixel composition 1R 1R 1R
Unit panel points [dot]
64×32 64×32 80×32
Unit panel size [mm]
306×153 612×245
Unit panel weight [g]
700 900 1500
Pixel density [point / m2]
62500 43000 17200
Peak power consumption [W/m2]
500 350 200
Average power consumption [W/m2]
350 200 100
Viewing angle 150°
Communication distance (m) 100 (no relay)
2. Semi-outdoor screen series
The semi-outdoor screen generally uses a single light to form a light-emitting point, and is suitable for an environment with high brightness and waterproofness, for example, under the eaves, in the window, and in a hall with strong light. The dot pitch is generally around 7.62mm-10mm; the illuminating color is generally single red or red/green double primary color; the control mode is asynchronous, synchronous graphic, video, etc. according to the use requirements.
★ Main technical parameters
Base color monochrome / double primary color
Pixel diameter [mm] 5.00 5.00
Pixel pitch [mm] 7.62 10.00
Pixel composition 1R 1R
Unit panel points [dot] 80×32 32×16
Unit panel size [mm] 612×245 320×160
Unit panel weight [g] 1700 1000
Pixel density [point / m2] 17200 10000
Peak power consumption [W/m2] 400 300
Average power consumption [W/m2] 250 200
Horizontal viewing angle 60-70°
Vertical viewing angle 45-60°
Maximum brightness [cd/m2] 3000 1800
3.Outdoor screen series
The outdoor screen area is generally more than ten square meters, the brightness is high, and it can be used in a direct sunlight environment. The viewing distance is generally more than ten meters, and the screen body is sealed and waterproof. According to the control method and display color, it can be divided into the following types:
â— Outdoor full color video screen
★ The light-emitting point of the display panel is made of solid color ultra-high brightness LED, and the display effect is real and natural.
★ The light board is a box structure, which is easy to install and has a flat appearance.
★ Using the latest technology level video control system, the display color is bright and clear.
★ Main technical parameters
Base color RGB (full color)
Pixel diameter [mm] 15.00 18.00
Pixel pitch [mm] 20 25
Pixel composition 2R1G1B 2R1G1B
Unit panel points [dot]
32×16 32×16
Unit panel size [mm]
640×320 800×400
Unit panel weight [g] 1500 1000
Pixel density [point / m2] 2500 1600
Peak power consumption [W/m2] 1000 800
Average power consumption [W/m2] 380 350
Weight [Kg/m2] <42 <40
Horizontal viewing angle 70°
Vertical viewing angle 45°
Highest brightness [cd/m2] 7000 800
â— Outdoor double primary color video screen
★ The light board is a box structure, which is easy to install and has a flat appearance.
★ Using the latest technology level video control system, the display color is bright and clear.
★ Main technical parameters
Primary color RG (double primary color)
Pixel pitch [mm]
11.5 16.0 22.0
Pixel composition 2R1G 2R1G 2R4G
Unit panel points [dot]
32×16 32×16 32×16
Unit panel size [mm]
368×184 512×256 704×352
Unit panel weight [g]
1000 1500 2300
Pixel density [point / m2]
7600 4096 2048
Peak power consumption [W/m2]
800 600 500
Average power consumption [W/m2]
300 250 150
Viewing angle 70°
Communication distance (m) 100 (no relay)
A new rule from the Drug Enforcement Administration (DEA) threatens to upend the American hemp industry, and could even result in criminal prosecutions for manufacturers of CBD and delta-8 THC products.
The DEA says the [interim final rule," issued Aug. 20, is simply a matter of adjusting its own regulations to account for changes to the Controlled Substances Act that were mandated by the 2018 Farm Bill (or Agricultural Improvement Act) that legalized hemp and CBD production. The new rule [merely conforms DEA`s regulations to the statutory amendments to the CSA that have already taken effect," says the agency. The new rule doesn`t break any ground, according to the DEA.
But many experts on cannabis and hemp law say the DEA rule creates a potential pathway the law enforcement agency could use to prosecute hemp processors and producers of CBD (cannabidiol) and delta-8 THC (or Δ8THC) products. There are two issues: partially processed CBD, and [synthetically derived" delta-8 THC.
Cbd Pod System Oem,Cbd Vape Pod Oem,Best Cbd Pod System,Cbd Pod System
Shenzhen MASON VAP Technology Co., Ltd. , https://www.e-cigarettefactory.com