Fengxian Power Supply Company employees are checking substation equipment to ensure winter power supply
Since the winter of 2017, the peak load of Haifengxian Power Supply Company on the national network has been about 1.37 million kilowatts, which is close to the highest load in winter in 2016. With the further exploration of the temperature in the later period, there is still room for a steady increase in the load level of Fengxian District. At present, the power supply in the district is stable and sufficient.
Before the arrival of winter, Fengxian Power Supply Company entered the peak period of power grid maintenance. Coverage inspections were carried out on the original power supply lines and equipment, and hidden dangers were discovered in time to ensure that they were "combat power" in the cold winter. For the load hotspots such as Qingcun and Jinhui, the operation mode adjustment and new investment lines were carried out to increase the load supply capacity. At the 35 kV Zhuangxing Station, the third main transformer was put into operation, increasing the load supply “quantityâ€. In addition, equipment upgrades were carried out on 220 kV power stations such as Tairi and Xinghuo, using a more advanced power supply system. For major projects, the dedicated line power supply has ensured that the construction progress of Rail Transit Line 5 is not affected by the outside world. The road construction along the Jinhai Road and Daye Highway is also carried out in an orderly manner with the close attention and cooperation of the electric workers.
In order to protect the electricity consumption of residents in Fengxian District, Fengxian Power Supply Company strictly controls the operation and management of the power grid. For each substation and each main transformer in the zone, an accident plan for the failure of different equipment components was formulated. According to the monthly major engineering projects, the grid operation stability check will be done well, and the accident warning will be issued to relevant units and departments in advance to actively prevent and control the grid risks that may arise from major projects. In the case of maintenance, the equipment's bearing capacity is used to find the weak link of the power grid, and the safety and reliability analysis is carried out to minimize the accidental interruption of power supply and other abnormal situations.
Fengxian Power Supply Company fully tapped its potential, coordinated the manpower, organized more than 10 construction, maintenance and repair teams, and quickly arrived when there was demand. The repair team will make a reasonable arrangement, and it will take about half an hour to reach every corner of the 700 square kilometers of the jurisdiction to check the problem. In the duty room, the control personnel closely monitor the operational information transmitted by the automation system, issue processing instructions one by one, and calmly respond. The duty officer and the operator calmed down and cooperated internally and externally to guard the Fengxian Power Grid in winter.
Automotive Diagnostic Connectors And Cables
We make OBD connector with terminal by ourselves, soldering type and crimping type are both available. Such as 16pin obd connector. OBD1, OB2, J1939, J1708, J1962, etc. Also molded by different type, straight type or right-angle type. The OBD connector cables used for Audi, Honda, Toyota, BWM, etc. We have wide range of materials source , also we can support customers to make a customized one to replace the original ones.
Automotive Diagnostic Connectors And Cables,Obd Connectors,Reliable OBD Connector,Black OBD Connector,OBD Diagnostic Cable,OBD2 Connectors
ETOP WIREHARNESS LIMITED , https://www.oemwireharness.com