I. The State Grid Jiangsu Power Company Zhenjiang Power Supply Company's Zhenjiang Power Supply Company's 2016 approval for construction of the eleventh batch of residential construction projects has been approved by Zhenjiang Power Supply Co., Jiangsu Power Grid Co., Ltd., and the project approval number is JSDLJPJLZJ[2016]1205. The funding source for the project is self-raised and it is now implemented. Qualified potential bidders are invited to participate in the bidding for this project.
2. The entrustment of the tenderee shall be specifically responsible for the bid invitation of this project.
III. Project Overview and Bidding Content
1. Project location: Zhenjiang area;
2. Project scale: The construction cost of a tender section is about RMB 8.113 million, and the construction cost of the second tender section is about RMB 1.7708 million;
3, the project estimated price (ten thousand yuan): 259.21;
4, plan to open, completion time: to
5. Bid Section Division and Bidding Content: The bidding project is divided into 2 bid sections. The corresponding bidding contents are as follows:
Lot No. Tender Name Tender Area Duration
ZJS2016121114-02 Yunteng International Residential District Power Supply and Distribution Project - Residential Distribution Project EPC Project Red Line Internal and External Electrical Installation and Commissioning 60 calendar days
ZJS2016121114-01 Power Supply and Distribution Engineering (Electrical) - Residential Distribution Project in Longwan District, Beijing Electrical Installation and Commissioning in Red Line 60 calendar days
Each applicant may apply for bids up to 2 bids, up to 1 bid.
Fourth, the applicant should have the main qualifications:
1. Applicant qualification categories and levels: [electric power engineering (construction general contracting) level 3] (inclusive) or above [transmission and transformation project level] (inclusive) or above;
2. It is proposed to dispatch professional and qualification grade of project manager: [Electrical and Mechanical Engineering Grade 2] (inclusive) or above;
3, other qualifications necessary conditions:
1. Has the ability to independently conclude contracts;
2. Not being ordered to suspend business, cancelled bids, or the assets have been taken over, frozen or bankruptcy;
3. The enterprise has not been subject to fraud or serious breach of contract, and major engineering quality, safety production accidents and other issues have been suspended by the relevant authorities and are suspended during the suspension period;
4. The important contents of the prequalification application are not inaccurate or falsified;
5. The company has safe production conditions and obtains a safety production license; the project manager obtains a safety production assessment certificate;
6. Participation in the audit project manager is not under construction and must meet one of the following conditions:
a. The project manager has no construction in progress after the change.
b. The project manager has no construction in progress after the change, and: the original contract period is full and the date of the change of filing has reached 6 months; or, the project was suspended for more than 120 days due to non-contractor reasons, and the construction unit Agreed and has gone through the project manager's change procedures.
c. The project manager has a construction in progress, but the project under construction belongs to the same project, the approval of the same project, sub-contracted or phased construction of the same construction site.
7. The owner has the right to reject bidders with poor performance, poor reputation, and bad behavior in previous projects. During the qualification examination, the application documents for the registration of construction companies and project managers with no record of bribery crimes records shall be based on the records of the procuratorial organs at the municipal (including prefecture and city level) and above registered at the registration place of the construction enterprise. Qualifications that do not provide evidence of bribery crime record records or bribery offences are unqualified units.
8. The local company must provide the original proof of the migrant worker's wage guarantee.
Carbide Reamers
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
Carbide reamers are used to drill a hole in material with a
pilot hole. It is especially suitable for machining the forming hole with very
strict terms of surface roughness, roundness, cylindricity, concentricity, burr
free and other quality requirements.
OPT present to our clients a wide variety
of carbide reamers, according to the flute type it can be classifed to Straight
Fluted Reamers, Right Hand Fluted Reamers and Left Hand Fluted Reamers
Advantage:
Unique guidepad geometry allows for excellent
roundness and straightness, even in an interrupted cut condition.
Surface roughness is reduced obviously.
Features
With
4, 6 or 8 flute
Multi-diameter tool allowing for excellent hole size and
concentricity between diameters.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
+
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
Carbide Reamer,Solid Carbide Reamers,Tapered Reamer,Adjustable Reamer
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtoolss.com